LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Abs Guided Routine - Pinpoint Tests B - BZ) >> Pinpoint Tests BA: SASM Communication Concern With GWM >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the GWM sends messages to the SASM over the HS-CAN 2. If the SASM does not receive these messages within a certain time frame (usually less than 1 second), the SASM sets DTCs. 

PPT BA SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0146:00 Lost Communication With Gateway "A": No Sub Type Information Sets in continuous memory and on-demand when the SASM detects any of the GWM messages are missing. This can be due to a GWM failure, a circuit failure on the HS-CAN or an excessive load on the network.
scientia non olet · About LEMON Manuals