LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Abs Guided Routine - Pinpoint Tests C - F) >> Pinpoint Tests D: Lost Communication With BCM (Body Control Module) >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the BCM sends messages to the GWM over the HS-CAN1, the GWM relays these messages to the ABS module over the HS-CAN2. If the ABS module does not receive these messages within a certain time frame, the module sets DTCs. For information on the messages sent to the ABS module by the BCM, refer to the Network Message Chart in Description and Operation in the  Anti-Lock Brake System (ABS) and Stability Control  article. 

PPT D ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0140:00 Lost Communication With Body Control Module: No Sub Type Information Sets when the ABS module is missing any of the BCM messages. This can be due to a BCM failure, a circuit failure on the HS-CAN or an excessive load on the network.
U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information This DTC sets if the ABS module receives invalid data from the BCM.