LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Abs Guided Routine - Pinpoint Tests C - F) >> Pinpoint Tests Cy: Abs Module Communication Concern With CCM >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the CCM sends messages to the ABS module over the FD-CAN. If the ABS module does not receive these messages within a certain time frame (usually less than 1 second), the ABS module sets DTCs. For information on the messages sent to the ABS module by the CCM refer to the Network Message Chart in Description and Operation of the  Anti-Lock Brake System (ABS) and Stability Control  article. 

PPT CY ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Setting Conditions
U012A:00 Lost Communication with Chassis Control Module 'A': No Subtype Information This DTC sets if the ABS module does not receive any messages from the CCM.