LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Abs Guided Routine - Pinpoint Tests C - F) >> Pinpoint Tests Cp: Ebb Brake Booster Motor Faults >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The EBB unit uses a motor to pressurize the brake system and to operate the ABS, ESC, RSC and other stability control features. The ABS module monitors the motor performance and sets a DTC when a motor fault is detected.

PPT CP ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C0594:12 Brake Booster Motor 'A' Performance: Circuit Short To Battery This DTC sets when the ABS module detects a voltage that is higher than expected.
C0594:78 Brake Booster Motor 'A' Performance: Alignment or Adjustment Incorrect This DTC sets when the ABS module detects a Booster Motor adjustment or alignment condition within the HCU.
C0594:92 Brake Booster Motor 'A' Performance: Performance or Incorrect Operation This DTC sets when the ABS module detects when the Brake Booster Motor 'A' is not performing correctly or is inoperative.
C0596:00 Brake Booster Motor 'A' Current Sensor Circuit Range/Performance: No Sub Type Information This DTC sets when the ABS module detects a current sensor reading that does not match what is expected.