LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Abs Guided Routine - Pinpoint Tests C - F) >> Pinpoint Tests CX: Abs Module In-Use Application Signing Key Error >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

When the battery voltage to the ABS module is greater than 10 volts with the ignition ON and there are no DTCs present, the ABS module carries out a self-test of the system software. If an error is detected, a DTC is set. 

PPT CX ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U202B:61 In-Use Application Signing Key: Signal Calculation Failure Sets when the PSCM internal self test detects a software error due to one or more files flashed on the PSCM being development files.
U202B:62 In-Use Application Signing Key: Signal Compare Failure Sets when the PSCM internal self test detects a software error due to one or more files flashed on the PSCM being development files.
scientia non olet · About LEMON Manuals