LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Abs Guided Routine - Pinpoint Tests C - F) >> Pinpoint Tests CV: Abs Module DTC C1A99 - Pressure Sensor >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The ABS module uses a pressure sensor located inside the HCU to monitor the integrity of the hydraulic system. When the brake pedal is pressed, the ABS module compares the value of the brake fluid line pressure sensor to the BOO switch input from the PCM over the HS-CAN. If the brake fluid pressure sensor value is not comparable to the BOO switch input, the ABS module sets one or more DTCs.