LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (Abs Guided Routine - Pinpoint Tests A - AZ) >> Pinpoint Tests Ar: Abs Module Communication Concern With IPC >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the IPC sends messages to the ABS module through the GWM over the HS-CAN 3. If the ABS module does not receive these messages within a certain time frame, the module sets DTCs. For information on the messages sent to the ABS module by the IPC, refer to the Network Message Chart in Description and Operation in the  Anti-Lock Brake System (ABS) and Stability Control  article. 

PPT AR ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information Sets when the ABS module is missing any of the IPC data messages. This can be due to an IPC failure, a GWM failure, a circuit failure on the CAN or an excessive load on the network.