LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (Abs Guided Routine - Pinpoint Tests A - AZ) >> Pinpoint Tests Am: Brake Pressure Sensor Fault >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The ABS module monitors various inputs and compares the values to what should be expected. If the values received are out of range or not what should be expected, the ABS module sets a DTC. 

PPT AM ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C0044:49 Brake Pressure Sensor "A": Internal Electronic Failure Sets when the ABS module detects an internal fault with the HCU.
C0044:51 Brake Pressure Sensor "A": Not Programmed Sets when the ABS module detects an internal fault.
C0044:64 Brake Pressure Sensor "A": Signal Plausibility Failure Sets when the ABS module detects a fault with the brake fluid pressure.
C0044:8F Brake Pressure Sensor "A": Erratic Sets when the ABS module detects an internal fault with the HCU.
C1A08:1C Pressure Sensor Supply: Circuit Voltage Out of Range Sets when the ABS module detects the brake system pressure sensor voltage supply is out of range.
PPT AM PCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P05FF Brake Pressure Sensor/Brake Pedal Position Sensor Correlation This DTC sets if the information from the brake pressure sensor and brake pedal position sensor do not match. This is most likely due to sensor concerns, wiring harness concerns or vehicle communication concerns.