LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (Abs Guided Routine - Pinpoint Tests A - AZ) >> Pinpoint Tests AE: Abs Module Communication Concern With PSCM >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the PSCM sends messages to the ABS module over the HS-CAN2. If the ABS module does not receive these messages within a certain time frame, the ABS module sets a DTC. For information on the messages sent to the ABS module by the PSCM, refer to the Network Message Chart in Description and Operation in the  Anti-Lock Brake System (ABS) and Stability Control  article. 

PPT AE ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0131:00 Lost Communication With Power Steering Control Module: No Sub Type Information This DTC sets if the ABS module does not receive any messages from the PSCM.
U0420:00 Invalid Data Received From Power Steering Control Module: No Sub Type Information This DTC sets if the steering column torque message is received with invalid data for longer than the allotted time. Also, if the EPAS Information message is not received for longer than the allotted time.