Front Door Glass Run and Bracket: Removal

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: LH side shown, RH side similar.

NOTE: Removal steps in this procedure may contain installation details.

Remove the front door latch. Refer to: Front Door Latch .
NOTE: This step is only necessary when installing a new component.

Remove the front door latch and cables from the front door glass run and bracket.
1. Remove the bolt from the exterior front door handle release cable retaining bracket.
2. Remove the exterior front door handle release cable retaining bracket.
3. Remove the bolt from the front door latch.
4. Remove the front door latch from the front door glass run and bracket.
5. Remove the front door latch rain shield from the front door glass run and bracket.

Courtesy of FORD MOTOR COMPANY