Rear Seat Cushion Cover - SuperCab: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: LH shown in illustration, RH similar.

Remove the rear seat. Refer to: Rear Seat RH - SuperCab . Refer to: Rear Seat LH - SuperCab .
Position up the rear seat cushion cover.
1. Release the rear seat cushion cover J-clip.
2. On both sides, unzip the rear seat cushion cover.
Courtesy of FORD MOTOR COMPANY
Position the rear seat latch pull strap through the cushion cover trim pocket.

Courtesy of FORD MOTOR COMPANY
NOTE: Use care when separating the seat cushion cover from the hook-and-loop strip or the hook-and-loop strip can be torn from the foam pad.

NOTE: Use care when separating the rear seat cushion cover from the hook-and-arrows or the hooks can be torn from the rear seat cushion foam.

Remove the rear seat cushion cover from the foam pad.
1. Release the hook-and-loop strips.
2. Release the hook-and-arrows.
Courtesy of FORD MOTOR COMPANY
NOTE: This step is only necessary when installing a new component.

Remove the rear seat cushion foam.

Courtesy of FORD MOTOR COMPANY