LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 723 (Parking Aid - Vehicles With: Parking Aid Camera) >> Removal And Installation >> Rear Parking Aid Camera >> Removal

Rear Parking Aid Camera: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles equipped with tailgate release handle mounted analog cameras 

  1. Remove the tailgate release handle. Refer to: Tailgate Release Handle .
  2. Release the tab and remove the rear parking aid camera bracket.
    GFD560598Courtesy of FORD MOTOR COMPANY

    Vehicles equipped with tailgate release handle mounted digital cameras 

  3. Remove the tailgate release handle. Refer to: Tailgate Release Handle .
  4. Release the tab and remove the rear parking aid camera bracket.
    GFD560599Courtesy of FORD MOTOR COMPANY

    Vehicles with high mounted stoplamp with camera 

  5. NOTE: To prevent damage to the center high mounted stop lamp connectors, refer to removal details in the referenced procedure.

    Remove the high mounted stoplamp. Refer to: High Mounted Stoplamp .

  6. Remove the screws, the bracket and the high mounted stoplamp camera.
GFD560600Courtesy of FORD MOTOR COMPANY