Manual Zoom (with Analog Rear Parking Aid Camera)

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The manual zoom feature is generated by the rear parking aid camera and has one level of zoom. If the manual zoom feature is on and the vehicle is shifted out of reverse (R), the manual zoom feature is disabled and must be re-enabled the next time reverse (R) is selected.

To turn the manual zoom feature on and off, the driver uses an on-screen button located on the audio system display while in reverse (R). The driver generated commands originate at the audio system display, which is hardwired to the APIM. The APIM sends the driver generated commands over the HS-CAN3 to the GWM. The GWM then sends the commands to the BCM on the HS-CAN1. The BCM sends the zoom command to the rear parking aid camera via the LIN circuit. The zoom is generated by the rear parking aid camera.