Rear Seatbelt Retractor and Pretensioner - SuperCrew: Installation
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect repair techniques or actions can cause an accidental pyrotechnic device deployment. Make sure the supplemental restraint and pedestrian protection system (if equipped) is depowered before reconnecting the component. Refer to the SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING
. Failure to precisely follow depowering instructions could result in serious personal injury from an accidental deployment.
NOTE:
During installation, make sure the seatbelt webbing is not twisted and the seatbelts and buckles are accessible to the occupants.
- To install, reverse the removal procedure.
- Repower the SRS. Refer to: Supplemental Restraint System (SRS) Repowering .
- Check the seatbelt system for correct operation. Refer to: Seatbelt System Functional Tests .