Child Safety Seat Tether Anchor - Regular Cab: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1. Position the front passenger forward.
2. Fold the front passenger seat backrest down.
3. If equipped. Fold the front center seat backrest down.
Courtesy of FORD MOTOR COMPANY
Lift the child safety seat tether anchor cover(s).

Courtesy of FORD MOTOR COMPANY
Remove the bolt(s) and the child safety seat tether anchor(s).
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY