Network Message Chart
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
RGTM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Vehicle speed | ABS | Used to disable the power tailgate function if vehicle speed is greater than 4km/h. |
| Power tailgate mode command | APIM | Used by the RGTM to enable/disable the power tailgate operation. |
| Power tailgate ajar status | BCM | Indicate tailgate ajar status. |
| Tailgate request | BCM | Used by the RGTM to open/close the tailgate when the BCM receives a valid request from a programmed RKE transmitter or passive key. |
| Vehicle lock status | BCM | Used by the RGTM to inhibit the power tailgate operation when the tailgate release switch is activated, unless the doors have been previously unlocked electronically. |
| Gear lever position | PCM | Used by the RGTM to inhibit power tailgate operation if the transmission is not in PARK. |
IPC Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Power tailgate chime request | IPC | Used by the IPC to sound the power tailgate chime. |