Leakage Inspection
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Leak Check Test
- With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview .
- Inspect the gasket and sealing areas for evidence of leakage.
- Trace the transmission fluid leak to the highest point.
- Clean the area of the suspected leak.
- Lower vehicle.
- Remove the transmission fluid fill plug or fluid level indicator.
- Add leak detection dye to the transmission fluid. Use 1 fl oz (30 ml) of dye solution for every 4 qt (3.8 L) of transmission fluid.
- With the transmission fluid at normal operating temperature, road test the vehicle for at least 1 mile with at least 1 application of the TCC.
- With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview .
- If the source of the leak is obvious, repair as required.
- After the repair, clean the affected area.