LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Wastegate Vacuum Sensor

Wastegate Vacuum Sensor

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 Lincoln Navigator, 2018 Lincoln MKZ, 2018 Lincoln MKX, 2018 Lincoln MKT, and 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

The wastegate vacuum sensor is an absolute pressure sensor that provides the PCM an analog voltage output that is proportional to the applied vacuum. The wastegate vacuum sensor is located near the turbocharger and the turbocharger wastegate regulating valve solenoid. The wastegate vacuum sensor measures the vacuum supplied by the turbocharger wastegate regulating valve solenoid to the wastegate actuator. The PCM uses the information from the wastegate vacuum sensor to determine the amount of vacuum being applied to the wastegate actuator.

Fig 1: Typical Wastegate Vacuum Sensor
G07883790Courtesy of FORD MOTOR CO.