Knock Sensor (KS)
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The KS is a tuned accelerometer on the engine which converts engine vibration to an electrical signal. The PCM uses this signal to determine the presence of engine knock and to retard spark timing.
Typical locations for the KS:
- KS11 - bank 1, sensor 1 (near cylinder 1/2)
- KS12 - bank 1, sensor 2 (near cylinder 3/4)
- KS21 - bank 2, sensor 1 (near cylinder 4/5)
- KS22 - bank 2, sensor 2 (near cylinder 6/8)