Pinpoint Test F: DTC (Diagnostic Trouble Code) B10DA:51
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10DA:51 PATS Target Identifier: Not Programmed Sets when there is no PCM/ SOBDMC (if equipped) ID stored in the BCM memory. Possible Sources
- There is no PCM and the SOBDMC (if equipped) ID stored in the BCM memory
- F1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present?
Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to DTC Chart(s) No CARRY OUT a parameter reset. REFER to: Anti-Theft Key Programming - Scan Tool .