LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine - 6.2L V8) >> Removal And Installation >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2018 Ford F-350 Super Duty and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If the oil pressure switch is to be reused, apply thread sealant.

    To install, reverse the removal procedure.

    Material: Motorcraft ® Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals