Exhaust Gas Recirculation (EGR) Coolant Outlet Hose: Removal
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Drain the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
- Loosen the clamps and remove the EGR coolant outlet hose. Use the General Equipment: Hose Clamp Remover/Installer
- Fill the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .