LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Electronic Engine Controls - 6.8L Triton-30V - V10) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty and 2018 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before installation, lubricate the CMP sensor O-ring seal with clean engine oil.
  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals