LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 673 (Engine - 5.0L 32V Ti-VCT) >> Removal And Installation >> Oil Pump Drive Belt >> Removal

Oil Pump Drive Belt: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the RH and LH timing chains. Refer to: Timing Chain .
  2. Remove the oil pan. Refer to: Oil Pan .
    1. Remove the oil pump bolts.
    2. Lower the rear of the oil pump assembly.
    3. Separate the oil pump sprocket from the oil pump drive belt.
    GFD555438Courtesy of FORD MOTOR COMPANY
  4. Remove the oil pump drive belt from the crankshaft sprocket.
GFD555439Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals