LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Automatic Transmission - 6R100 -- F250-F350 Super Duty) >> Diagnosis And Testing >> Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 6.2L V8 >> Pinpoint Tests >> Pinpoint Test E : OSS (Output Shaft Speed) Sensor >> Notes

Pinpoint Test E : OSS (Output Shaft Speed) Sensor: Notes

WARNING: This page is about a different car, the 2018 Ford F-350 Super Duty and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Transmission Controls - TorqShift 6 for schematic and connector information.

Normal Operation 

The OSS sensor is a Hall-effect type sensor that provides a signal to the PCM that changes in frequency as the rotating speed of the output shaft ring gear varies. The PCM also compares the OSS sensor signal with the TSS sensor signal to determine the gear ratio provided by the rear planetary gearset. The PCM uses the OSS sensor signal as an input for its strategies for shifts and TCC operation. The PCM also uses the OSS sensor signal for transmission fault detection and diagnostics.

scientia non olet · About LEMON Manuals