Pinpoint Test JB: Secondary Ignition Cop
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A damaged ignition system may cause high catalyst temperatures. Check the components next to the catalyst and muffler for heat damage.
Normal Operation and Fault Conditions
Refer to the DTC Fault Trigger Conditions.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| PCM P112A:00 | Too Many Engine Starts During Factory/Transport Mode: No Sub Type Information | Sets when PCM detects that the vehicle is in transport mode and the engine has been started greater than a calibrated number of times. Spark plug fouling may be a concern and the wrench light will flash in one second intervals until the vehicle is taken out of transport mode. |
Possible Sources
- Ignition coil
- Spark plug (12405)