Coolant Inlet Connector: Installation
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
- Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
- Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
- Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
- To install, reverse the removal procedure.