Valve Tappets: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.

Remove the RH or LH camshafts. Refer to: Camshafts .
NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations.

NOTE: RH shown, LH similar.
- If the camshafts and valve tappets are to be reused, make sure they are assembled in their original positions.
- Remove the valve tappets.

Courtesy of FORD MOTOR COMPANY