LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 (DTC Charts 5.0L - Assembly)) >> Removal And Installation >> Shift Solenoids (SS) >> Removal

Shift Solenoids (SS): Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

All Solenoids 

  1. Remove the transmission fluid pan gasket and filter. Refer to: Transmission Fluid Pan, Gasket and Filter . Refer to: Transmission Fluid Pan, Gasket and Filter - 3.0L Power Stroke Diesel .

    LPC (line pressure control) and TCC (torque converter clutch) Solenoids 

    1. Slide the plastic lock to the unlock position. While pressing the plastic tab, disconnect the electrical connector.
    2. Disconnect the internal wiring harness retainer.
    GFD558742Courtesy of FORD MOTOR COMPANY
  2. Remove and discard the bolts and remove the solenoid retaining plate.
    GFD558743Courtesy of FORD MOTOR COMPANY
  3. Remove the solenoid(s) from the main control valve body.

    1. LPC solenoid (7G383)
    2. TCC solenoid (7G136)

    GFD558744Courtesy of FORD MOTOR COMPANY

    Solenoids D and E 

  4. Remove the bolts and the shift solenoid retaining plate.
    GFD558745Courtesy of FORD MOTOR COMPANY
  5. If replacing more then one solenoid, number the solenoids and number the main control valve body solenoid ports to correspond to the solenoid.
    GFD558746Courtesy of FORD MOTOR COMPANY
  6. Remove and discard the shift solenoid retainer(s).
    GFD558747Courtesy of FORD MOTOR COMPANY
    1. Slide the solenoid(s) out of the main control valve body bore.
    2. Rotate the solenoid(s) in a clockwise direction.
    3. Slide the plastic lock to the unlock position. While pressing the plastic tab, disconnect the electrical connector.
    GFD558748Courtesy of FORD MOTOR COMPANY
  7. Remove the solenoid(s) from the main control valve body.

    1. SSE (7J136)
    2. SSD (7J136)

    GFD558749Courtesy of FORD MOTOR COMPANY

    Solenoids A, B, C, and F 

  8. Remove the main control valve body. Refer to: Main Control Valve Body .
  9. Remove the bolts and the shift solenoid retaining plate.
    GFD558750Courtesy of FORD MOTOR COMPANY
  10. If replacing more then one solenoid, number the solenoids and number the main control valve body solenoid ports to correspond to the solenoid.
    GFD558751Courtesy of FORD MOTOR COMPANY
  11. Remove and discard the shift solenoid retainer(s).
    GFD558752Courtesy of FORD MOTOR COMPANY
  12. Slide the plastic lock to the unlock position. While pressing the plastic tab, disconnect the electrical connector(s).
    GFD558753Courtesy of FORD MOTOR COMPANY
  13. Remove the solenoid(s) from the main control valve body.

    1. SSA (7J136)
    2. SSF (7J136)
    3. SSC (7J136)
    4. SSB (7J136)

GFD558754Courtesy of FORD MOTOR COMPANY