E Clutch: Notes

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	100-002 (TOOL-4201-C)Holding Fixture with Dial Indicator Gauge
Courtesy of FORD MOTOR COMPANY	205-1018Installation Tube
Courtesy of FORD MOTOR COMPANY	307-003 (T57L-500-B)Holding Fixture, Transmission
Courtesy of FORD MOTOR COMPANY	307-091Handle, Torque ConverterTKIT-2009TC-F
Courtesy of FORD MOTOR COMPANY	307-346 (T97T-7902-A)Retainer, Torque ConverterTKIT-1998-LM (NavigatoR)TKIT-1997-F/FLM/LT
Courtesy of FORD MOTOR COMPANY	307-651Bracket, Pump Remover/Installer
Courtesy of FORD MOTOR COMPANY	307-651-01Adapter for 307-651 (Super Sub Assembly Lifting)
Courtesy of FORD MOTOR COMPANY	307-653Sizer, Input Shaft Teflon Seal
Courtesy of FORD MOTOR COMPANY	307-661Gauge, End PlayTKIT-2009C-FTKIT-2009C-ROW
Courtesy of FORD MOTOR COMPANY	307-661-01Spacers/Plate, Clearance Gage
Courtesy of FORD MOTOR COMPANY	307-662Gauge, Clutch Pack EndplayTKIT-2009C-FTKIT-2009C-ROW
Courtesy of FORD MOTOR COMPANY	307-741Spring Compressor, F Clutch
Courtesy of FORD MOTOR COMPANY	307-747Installer/ Sizer, Input Shaft Solid Sealing Rings; Large
Courtesy of FORD MOTOR COMPANY	307-748Installer/Sizer, Input Shaft Solid Sealing Rings; Small
Courtesy of FORD MOTOR COMPANY	307-750Installer, Converter Seal
Courtesy of FORD MOTOR COMPANY	307-790Endplay Check Gauge
Courtesy of FORD MOTOR COMPANY	307-797Installer, Alignment Studs (3) and Alignment Pin (All 10R)
Hydraulic Press
Magnet

Materials

Name	Specification
Motorcraft® MERCON® ULV Automatic Transmission FluidXT-12-QULV	WSS-M2C949-A, MERCON® ULV