Engine Oil Draining and Filling
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION
Special Tool(s) / General Equipment
| Oil Drain Equipment |
|---|
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 5W-30 F-150 Diesel Motor OilXO-5W30-QFA | WSS-M2C214-B1 |
Draining
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
- Remove the engine appearance cover.
-
NOTE: The oil filter housing needs a minimum of 1 minute to allow the oil to drain out of the oil filter housing to minimize oil spillage.
Loosen the oil filter cap and let the oil filter housing drain. Remove the oil filter cap.
- Remove and discard the oil filter cap O-ring seal.
- Remove and discard the oil filter. Use the General Equipment: Oil Drain Equipment
- Remove the nut. Remove the bolts and the transmission housing cover.
- Remove the oil pan plug and drain the engine oil. Install the oil pan plug. Use the General Equipment: Oil Drain Equipment
Torque: 18 lb.ft (25 Nm)
- Install the transmission housing cover and the bolts. Install the nut.
Torque: 71 lb.in (8 Nm)
Filling
- Install a new oil filter.
- Install a new oil filter cap O-ring seal and lubricate.
Material: Motorcraft® SAE 5W-30 F-150 Diesel Motor Oil / XO-5W30-QFA (WSS-M2C214-B1)
- Install the oil filter cap.
Torque: 18 lb.ft (25 Nm)
- Install the engine appearance cover.
- Fill the engine with clean engine oil. Refer to: Specifications .
Material: Motorcraft® SAE 5W-30 F-150 Diesel Motor Oil / XO-5W30-QFA (WSS-M2C214-B1)