LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Exterior Lighting - Diagnosis And Testing, General Procedures, Removal And Installation) >> Removal And Installation >> High Mounted Stoplamp >> Installation

High Mounted Stoplamp: Installation

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: The step is only for vehicles equipped with a high mounted stoplamp with camera.

    Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization - BCM configure the BCM.

scientia non olet · About LEMON Manuals