Pinpoint Test L: B11DB:49
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B11DB:49 Battery Monitoring Module "A": Internal Electronic Failure Sets in the BCM when an internal electronic failure is detected. Possible Sources
- BCM
- L1 PERFORM INSPECTION AND VERIFICATION
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the BCM self-test.
Is DTC B11DB:49 recorded?
Yes CLEAR the DTC. REPEAT the BCM self-test. If DTC B11DB:49 is retrieved, INSTALL new battery monitoring sensor. REFER to: Battery Monitoring Sensor . No The system is operating correctly at this time.