Diagnostic Trouble Code (DTC) Chart
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Diagnostic Trouble Code Chart
| Module | DTC | Description | Action |
|---|---|---|---|
| BCM | B109F:01 | Intrusion Sensor Module: General Electrical Failure | GO to Pinpoint Test E |
| BCM | B109F:02 | Intrusion Sensor Module: General Signal Failure | GO to Pinpoint Test E |
| BCM | B109F:08 | Intrusion Sensor Module: Bus Signal / Message Failure | GO to Pinpoint Test E |
| BCM | B109F:49 | Intrusion Sensor Module: Internal Electric Failure | GO to Pinpoint Test F |
| BCM | B109F:55 | Intrusion Sensor Module: Not Configured | GO to Pinpoint Test G |
| BCM | B109F:97 | Intrusion Sensor Module: Component or System Operation Obstructed or Blocked | GO to Pinpoint Test E |
| BCM | B109F:9A | Intrusion Sensor Module: Component or System Operating Conditions | GO to Pinpoint Test E |
| BCM | B1305:01 | Hood Switch: General Electrical Failure | GO to Pinpoint Test C |
| BCM | B1305:11 | Hood Switch: Circuit Short To Ground | GO to Pinpoint Test A |
| BCM | B1305:15 | Hood Switch: Circuit Short To Battery or Open | GO to Pinpoint Test C |