Pinpoint Test Z: U0420:86
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U0420:86 Invalid Data Received from Power Steering Control Module "A": Signal Invalid This continuous memory DTC can set in IPMA due to a fault in the PSCM or an invalid input from the PSCM. Possible Sources
- PSCM concern
- Z1 CHECK FOR STEERING COLUMN CONTROL MODULE SIGNAL
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U0420:86 still present?
Yes RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the PSCM. REFER to: Power Steering . No DIAGNOSE the observable symptom.