Pinpoint Test U: C1001:98
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA C1001:98 Vision System Camera: Component Or System Over Temperature This continuous memory and on-demand DTC that sets in the IPMA if IPMA camera component or system over temperature. Possible Sources
- IPMA camera concern
- U1 CHECK FOR IPMA (IMAGE PROCESSING MODULE A) CAMERA COMPONENT OR SYSTEM OVER TEMPERATURE
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC C1001:98 still present?
Yes This may occur during extended use in extremely high weather temperatures. The lane keeping system operation resumes after the IPMA camera cools. No The repair is complete.