Pinpoint Test S: C1001:54 Or C1001:78
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA C1001:54 Vision System Camera: Missing Calibration This continuous memory DTC sets when a new IPMA has been installed without performing the calibration. IPMA C1001:78 Vision System Camera: Alignment Or Adjustment Incorrect This continuous and on-demand memory DTC sets when a new IPMA has been installed without performing the camera alignment and adjustment. Possible Sources
- Communication concern
- IPMA concern
- IPMA camera
- S1 CHECK FOR CORRECT ALIGNMENT, ADJUSTMENT and CALIBRATION OF IPMA (IMAGE PROCESSING MODULE A) CAMERA
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC C1001:54 and C1001:78 still present?
Yes PERFORM the camera alignment using a diagnostic scan tool. REFER to: Lane Keeping System - System Operation and Component Description . No The repair is complete.