Pinpoint Test R: C0072:00
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA C0072:00 Brake Temperature Too High: No Sub Type Information This DTC sets when the IPMA receives a brake over temperature message from the brake system. Possible Sources
- IPMA concern
- Brake system
- R1 CHECK FOR THE BRAKE TEMPERATURE
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC C0072:00 still present?
Yes ALLOW the brake system to cool for 30 minutes. CLEAR the DTC and REPEAT the self-test No The repair is complete.