Pinpoint Test Ax: C1001:95
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA C1001:95 Vision System Camera: Incorrect Assembly This continuous memory and on-demand DTC sets in the IPMA when the IPMA camera installation alignment is incorrect. Possible Sources
- IPMA camera alignment
- AX1 CARRY OUT THE IPMA (IMAGE PROCESSING MODULE A) CAMERA ALIGNMENT USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, carry out the IPMA camera alignment procedure.
Did the camera alignment procedure complete successfully?
Yes The system is operating correctly at this time. No REFER to the camera alignment procedure to troubleshoot the concern. REFER to: Image Processing Module A (IPMA) Camera . REFER to: Lane Keeping System - System Operation and Component Description .