Pinpoint Test Av: U3000:51
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U3000:51 Control Module: Not Programmed This continuous memory DTC sets when the IPMA not programmed. Possible Sources
- Suspect module
- IPMA
- AV1 INSTALL A NEW SUSPECT MODULE
- Ignition OFF.
- INSTALL a new module in question. REFER to: Image Processing Module A (IPMA) .
- Operate the system and determine if the concern is still present.
Is the concern still present?
Yes CHECK OASIS and follow the instructions for the applicable TSB, GSB, SSM or FSA. No The repair is complete.