Pinpoint Test Ab: U0429:86
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U0429:86 Invalid Data Received From Steering Column Control Module: Signal Invalid This continuous memory DTC can set in IPMA due to a fault in the SCCM or an invalid input from the SCCM Possible Sources
- SCCM concern
- AB1 CHECK FOR SCCM (STEERING COLUMN CONTROL MODULE) SIGNAL
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U0429:86 still present?
Yes RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the SCCM REFER to: Steering Wheel and Column Electrical Components . No DIAGNOSE the observable symptom.