Pinpoint Test Aa: U0423:86
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U0423:86 Invalid Data Received from Instrument Panel Cluster Control Module: Signal Invalid This continuous memory DTC can set in IPMA due to a fault in the IPC or an input to the IPC. Possible Sources
- IPC concern
- AA1 CHECK FOR IPC ALIVE/SEQUENCE COUNTER INCORRECT/NOT UPDATED
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U0423:86 still present?
Yes RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the IPC. REFER to: Instrumentation, Message Center and Warning Chimes . No DIAGNOSE the observable symptom.