Pinpoint Test L: DTC (Diagnostic Trouble Code) B10DA:51, B1434:51
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10DA:51 PATS Target Identifier: Not Programmed Sets when the BCM detects a fault when there is no PCM ID is not stored in the BCM. BCM B1434:51 PATS Target #2 Identifier: Not Programmed Sets when the BCM detects a fault when there is no PCM Target #2 ID is not stored in the BCM. Possible Sources
- No PCM ID stored in the BCM memory
- L1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other DTC's Present?
Yes DIAGNOSE all other DTC's first. Refer to DTC Chart(s) . No CARRY OUT a parameter reset. REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .