Pinpoint Test J: DTC (Diagnostic Trouble Code) B10D8:00

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions

REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
BCM B10D8:00	PATS Key Less Than Minimum Programmed: No Sub Type Information	Sets when the BCM detects a fault when less than two keys are not programmed.

Possible Sources

2 keys not programmed

J1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

Using a diagnostic scan tool, carry out the BCM self-test.

Are there any other DTC's Present '

Yes	DIAGNOSE all other DTC's first. Refer to BCM DTC Chart. REFER to: Body Control Module (BCM) .

No	CYCLE the customer's second key in the ignition cylinder to program. (When less than 2 keys are programmed, the BCM automatically programs the first 2 keys that are cycled in the ignition key cylinder).