Pinpoint Test I: DTC (Diagnostic Trouble Code) B10D7:55
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:55 PATS Key: Not Configured Sets when the BCM detects a fault with the CEI is not configured as part of the PMI. Possible Sources
- CEI lock configuration not completed during PMI procedure.
- I1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other DTC's Present?
Yes DIAGNOSE all other DTC's first. Refer to DTC Chart(s) . REFER to: Body Control Module (BCM) . No The CEI was not completed during the PMI procedure. CARRY OUT the CEI lock configuration as part of the PMI procedure.