LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Electronic Engine Controls - 5.0L 32V Ti-VCT) >> Removal And Installation >> Engine Oil Level Sensor >> Removal

Engine Oil Level Sensor: Removal

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. NOTE: If equipped.

    Remove the bolts and the skid plate.

    GFD558345Courtesy of FORD MOTOR COMPANY
  3. NOTE: If equipped.

    Remove the fasteners and the underbody shield.

    GFD558346Courtesy of FORD MOTOR COMPANY
  4. NOTE: If equipped.

    Remove the bolts and the skid plate.

    GFD558347Courtesy of FORD MOTOR COMPANY
    1. Disconnect the oil level sensor electrical connector.
    2. Detach the wiring harness retainers.
    GFD558348Courtesy of FORD MOTOR COMPANY
  6. Remove the engine oil lever sensor.
GFD558349Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals