LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Electronic Engine Controls - 3.5L V6 POWERBOOST (CN)) >> Diagnosis And Testing >> Electronic Engine Controls >> Pinpoint Tests >> Pinpoint Test V: P1060, P1061

Pinpoint Test V: P1060, P1061

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    REFER to: Engine - Overview .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P1060: 00 Excessive Engine Component Deterioration: No Sub Type Information This DTC sets when the service life of the accessory drive belt tensioner has reached reached it's limit.
    PCM P1061: 00 Excessive Engine Component Deterioration - Forced Limited Engine Speed: No Sub Type Information This DTC sets when the service life of the accessory drive belt tensioner has reached reached it's limit.

    Possible Sources 

    • Accessory drive belt tensioner

  2. V1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Place the ignition switch in the START position.

    • Using a diagnostic scan tool retrieve and record all Diagnostic Trouble Codes (DTCs).

    Are DTC P1060 or P1061 present? 

    Yes  Install a new accessory drive belt tensioner. REFER to: Accessory Drive Belt Tensioner .
    No  The system is operating correctly at this time.
scientia non olet · About LEMON Manuals