LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Electronic Engine Controls - 3.3L DURATEC-V6) >> Removal And Installation >> Crankshaft Position (CKP) Sensor >> Installation

Crankshaft Position (CKP) Sensor: Installation

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Connect the electrical connector to the CKP sensor to aid in the installation.
  1. To install, reverse the removal procedure.
  2. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
scientia non olet · About LEMON Manuals