LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Electronic Engine Controls - 3.0L Power Stroke Diesel) >> Removal And Installation >> Engine Oil Pressure (EOP) Sensor >> Installation

Engine Oil Pressure (EOP) Sensor: Installation

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary if the EOP sensor adapter needs to be installed.

    Add thread sealant to the treads of the EOP sensor adapter and install adapter.

    Material

    : Motorcraft® Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

    Torque

    : 159 lb.in (18 Nm)

scientia non olet · About LEMON Manuals