LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Electronic Engine Controls - 3.0L Power Stroke Diesel) >> Description And Operation >> Electronic Engine Controls - System Operation and Component Description >> System Operation >> Minimum Fuel Mass Adaption

Minimum Fuel Mass Adaption

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Minimum Fuel Mass Adaption is an algorithm used to detect deviations in individual fuel injector performance from nominal. In a deceleration fuel shut off condition, fuel rail pressure is set to a calibrated pressure and small injections are made from a single fuel injector. The measured acceleration in crankshaft speed is compared to the expected acceleration for the target fuel quantity. From this information, a correction to fuel injection quantity for the specific injector is determined. This information is used to adjust all pilot injections on that fuel injector for correct fuel delivery. If the absolute amount of correction exceeds minimum or maximum limits, a DTC sets.

scientia non olet · About LEMON Manuals